It is true that more and more phone manufacturers have been turning to waterproof designs for a year or two, and this trend seems to have no slowdown in sight. LG G4 water damage sticker is one of the best. Yet we do not all have the luxury of a waterproof phone and that means we have to resort to other methods. The best method to prevent water damage is to take precautions in advance, using something like the CaliCase waterproof pouch for situations where you know you are in contact with water.
And if it’s already too late, and your phone has unexpectedly plunged into the water? Let’s start by telling you that saving a phone damaged by water is pretty much a coin. There can be no guarantee that the device will be saved. And if the gadget has already been hurt, there is a good chance that the damage is permanent. It does not matter, often the stars line up and you end up saving this precious technology that contains all your important data and connects you to the world.
With the help of the following tips, we aim to increase the likelihood of your phone through such a disaster. So let’s go.
Do you see your phone falling in the water? Take it out and make sure it’s off!
I know it’s hard to react quickly when such a devastating event happens, but you have to get out! The longer your device stays underwater, the lower the chances of survival. You have to dig in and take this phone out of the water right away. Yes … even if it’s in the bathroom!
Once the phone is out of the water, make sure it is turned off and stays that way. Even if it looks good … it’s important to turn it off just in case. If the phone is still on, turn it off or remove the battery if you can. Then place it in a safe place, preferably on a flat surface on paper towels.
The good news is that even non-waterproof phones these days are usually at least a little more water resistant than phones from years past, and so there are a few things you can do – as well as do should not do – if you want to get there without too much damage.
What Not To Do After Seeing Your Phone Fallen Into The Water
The following actions can make the difference between a total phone or a survival story. You better be careful what you do. Before finding a solution, let’s try to avoid the major failures you could cause.
- Do not turn on the phone, as we have already mentioned. Electrical components do not play well with water during use.
- Do not plug it in either! For the same reason.
- Do not press any key: This can push the water further into the phone. It is best to try to play as little as possible with the phone.
- Do not shake or blow into the unit. This could also push the water into the deeper areas of the phone. Try to avoid the driers – not only because of the blower but also because of the next point.
- Do not apply heat to the phone. Remember that excessive heat can also damage the phone. You do not want to add more damage!
- Do not move the phone too much. The same transaction you do not want the water to move inside the phone.
- Disassemble the phone damaged by water
- Do not confuse this step with “disassemble the phone”! What I mean is that you should remove everything that is removable. If the back cover is removable, remove it. Also, try to remove the battery (if you can), the SIM card and the SD card. Put everything in the paper towel.
Now, if you are an experienced technician in some way and know the ins and outs of a phone, and do not be afraid to risk voiding your warranty, you can go ahead and take apart the entire phone. This could help dry out each piece faster. Be careful, if you do not know what you are doing, it could cause more harm than good.
Try to dry the outside with a paper towel
We must first try to get rid of all the excess water found on the outside of your phone. Use the paper towel to dry all components. Make sure not to play with the phone too much. Dry gently without moving things too much.
You could try a vacuum cleaner
Of course, there are areas that the paper towel cannot access. And while we told you not to blow anything in the phone, we did not tell you not to suck the water. In fact, a vacuum cleaner can suck water from the phone without much risk. Just make sure the suction does not move the phone excessively. Oh, and try not to use one as big as the photo!
It’s time to dry it
The hard part is coming because it involves leaving the phone intact for a long period of time. This means that you can not use your smartphone! If you have another phone that you can borrow, make sure the SIM card is completely dry and insert it into the handset. Otherwise, all you have to do is use smoke signals, payphones, and all those archaic stuff.
So, how do you dry your phone? You can just leave the phone on the counter or inside a drawer, but some people like to give some help. The idea is to put it in an environment that will facilitate its drying process. A very common practice is to put the phone in a Ziploc bag filled with rice and let it sit for 2-3 days.
Among the best options are silica gel packs, which are those little packages that you will often find in shoes or electronic boxes (and you can not eat). However, it’s not like we’re all here, but if you think in advance, you could get good deals on Amazon.
And while we’re thinking about something to come – you can also buy a water rescue kit. I happen to like the Kensington EVAP package, which includes a special bag and packets of silica gel. Kensington says that 700% moisture drying efficiency is better than rice, although it’s hard to say how true their demand is. Yet this could be worth the investment.
So you did everything you could and a few days passed. It’s time to see if all your efforts have paid off. Take the phone out of the place where you left it and collect it. Then, plug in the phone and try to turn it on. If it works, you have succeeded! Stay on the lookout for any strange behavior, though. At least for a few days, because something can still happen. Also, test all components. Make a call to see if the microphone and headphones are working, test the speaker, etc.